Every material has a certain moisture. By knowing that moisture the production, the storage and the quality of this material can be optimized. ACO sensors determine the moisture of different materials in real-time. They are used in silos, conveyer belts, screw conveyers, etc. The moisture sensors are working with the capacity measuring principle. The surface of the sensor is directly in contact with the measured material. The ACO moisture sensors are:

• less affected by contamination, discoloration, particle size and temperature of the material
• designed to cope with the toughest application, longstanding, reliable reading
• adaptable to existing plants with little effort
• up to 16 sensors in 1 system

The Turbine Meter Series RQ from Bopp & Reuther Messtechnik for Oils, Acids, Solvents, Liquified Gases

• Accuracy better then ±0,15%
  
• Repeatability better than ±0,02%
  
• for high pressures and low viscosities
  
• Rim type rotor with higher pulse resolution
  
• Special designs (Cl. 2500, Hastelloy, Duplex, HART…)
  
• Extremely rugged design, suitable for LPG, bio fuels…
  
• Quality “made in Germany”
  
• Sustainability: decades of trouble free operation, easy to repair/maintain
• for Chemical - Petrochemical - Mineral Oil Industry - Loading Systems

What are the advantages of high accuracy oval gear flowmeters compared to Coriolis Mass Flow instruments?

Coriolis manufacturers often give the impression that their Mass Flow solution the only reliable high precision measurement technology for oil flow applications.

After comparing the specs and analyzing the facts we do disagree. In many cases Bopp & Reuther Oval Gear Flow Meters offer a better alternative comparing the reliability, profitibility, maintenance issues and the range of viscosity. Here an overview.

The KEP Supertrol 2 Flow Computer with XHVD Enclosure is suitable for Hazardous Areas with Class 1 Division 1 Groups B, C & D certification. The addition of Group B certification to the XHVD makes it suitable to be used with Hydrogen and other flammable gases, liquids and vapors.

Oval Gear Meters from Bopp & Reuther Messtechnik for high accuracy volume measurement of liquids and liquid gases in loading applications of the chemical and petrochemical industry, petroleum industry and of food and beverages:

• high accuracy and repeatibilty: fiscal/custody transfer
• reliable, long lasting, low maintenance
  
• low pressure drop, no drift, no inlet/outlet required
• compact, simple installation and commisioning
• Large range of metered liquids, wide viscosity range
  

The APIS positioner is a final control element for control valves. The positioner with a  pneumatic membrane and piston single and double-acting actuators with linear and rotational movement allows quick and precise control of the actuator piston rod using an analog or digital control signal.

Surface mount temperature sensors measure the surface temperature of an object. The temperature sensor is not connected to the direct process media but to an outside tank, pipe or assembly point. The thermocouple sensors are cost effective, have fast response times, broad temperature ranges and can fit almost anywhere.

Here we introduce the most common types:

Gasket - Bayonet - Tube Skin - Magnetic - Pipe Clamp, Right Angle Assemblies

Pitot Tube flowmeters measure the flow of

• liquids
• gases, flue gas
• saturated wet steam and super-heated dry steam.

They are reliable, long-lasting and accurate in rough conditions with up to 320 bar and 1200°C and low pressure loss. The are used for Chemical & Pharmaceutical processes, Steam Boiler & Biogas, flue gases, Cryogenics, high pressure & temperature applications and in Energy measurement.

We offer solutions for special temperature applications:

• Tubeskin: for boilers, superheaters, heat exchangers
  
• Multicouple: for multiple temperature access points
  
• Wafer Sensor: for semiconductor processing

We offer engineering services such as Wake Frequency Calculations.